ASME SA285 Grade C Steel Sheet is a low to intermediate tensile strength pressure vessel grade steel sheet. Used in the fabrication of pressure vessels and boiler tanks, SA285 Grade C should not be considered for use in high pressure applications.

 

The material has good weldability under conventional methods using fusion welding. Plates supplied to this standard are normally delivered ‘as rolled’ unless otherwise specified.

 

Miele Metal Limited can ship ASME SA285 Grade C plates from stock to destinations worldwide.

 

(Maximum values unless stated otherwise. Yield value is minimum)

 

(Please note: the technical information above is for guidance only – for exact specifications please check with our Sales Team)

 

Table 1: Chemical & Mechanical Values for ASME SA285 Grade C Steel sheet

 

 

C

0.16

Si

0.35

Mn

0.4/1.2

P

0.03

S

0.03

Al

0.02

Cr

0.3

Cu

0.3

Ni

0.3

Mo

0.08

Nb

0.01

Ti

0.03

V

0.02

Tensile
N/mm²

360/480

Yield
N/mm²

 

 

 

wKgGTFhOUjOAb--pAAEyEtwrzS4859_600_600.jpg

 


Leave a Comment(And our MOQ is 1ton)